Combination of agents with a high proportion of lubrication improvers and cleaning additives. This product is therefore specially formulated to meet the demands of the latest diesel technology, e.g. Common Rail and pumped jet high pressure injection, and low sulfur diesel fuels to protect these vehicles against wear. Other agents which have cleaning, dispersion and material protection properties maintain the operation of high-precision injectors. Due to the increased ignition performance, the fuel shows better combustion behavior when the engine is cold and the pollution from odors in the exhaust is reduced. Ensures optimum fuel combustion and reduces the formation of soot. The service life of diesel particulate filters is thus extended.

Properties

• Good corrosion protection
• Tested for the use with catalytic converters
• Guarantees low fuel consumption
• Guarantees optimum combustion
• Prevents seizing and the injector needles from gumming up
• Excellent cleanliness
• Optimizes engine performance
• Boosts the cetane number
• Reduces soot emissions
• Removes deposits from entire fuel system
• Minimizes wear
• Increases the lubricating effect
• Stable to oxidation
• Protects the diesel particulate filter
• Regeneration aid for diesel particulate filters
• Especially suitable for short trips and city vehicles
  

Technical data

Shelf life in original sealed container - 36 months
Mineral oil content - 74,4 %
Color / appearance - Red-brown
Odor - Characteristic
Density at 20 °C - 0,8261 g/cm³
Flash point - >63 °C

Areas of application

Added to diesel fuel for all diesel engines with common rail and pumped jet injection systems. Ideally suitable for preserving engines when decommissioned for long periods under extreme conditions. Suitable for HVO and XTL diesel.

Comment

The combination with LIQUI MOLY Diesel Particulate Filter Protection (Part no. 5148) is to be avoided.

Application

The ignition performance is increased and the lubrication action and lubricity performance are improved only by adding the product to low-sulfur diesel fuels on a continual basis. One 250 ml can of the product is sufficient for 75 liters of fuel. Dosage 1:300.

To keep the injectors clean and for corrosion protection, add Diesel System Treatment to the passenger vehicle diesel tank every 2,000 km. 

When decommissioning and preserving engines, add Diesel System Treatment to diesel fuel at the rate of 1 %. Follow the instructions on preservation.

Diesel System Treatment can be mixed with the fuel at any time since mixing takes place automatically.